one mic clip wireless with one receiver k35

One wireless microphone and one receiver. Provide some general information about how this setting works.

A wireless microphone system typically consists of three main components:

Microphone transmitter: This is the component that picks up sound using the microphone capsule and transmits it wirelessly to the receiver. The microphone transmitter can be attached to clothing or hand-held, depending on the design.

Receiver: The receiver picks up the audio signal sent by the microphone transmitter. It then converts the signal back into an audio format that can be sent to an amplifier, mixer, or directly to a speaker system.

Microphone clip: This is an accessory used to secure the microphone transmitter to a piece of clothing, usually worn by the person speaking.

For setup, if you have one wireless microphone and one receiver, you'll typically do the following:

Attach the microphone transmitter to the person who will be speaking, using the microphone clip to secure it to their clothing.

Place the receiver within range of the transmitter and connect it to your audio system, such as a mixer or amplifier.

Once everything is set up, the microphone should transmit the sound wirelessly to the receiver, which will then output it to your sound system.